It's time to bring the Porsche 992 C4S Spyder wheels back to their best using a mix of our favorite products and Mammoth Detailing tools.
First we start with the P&S Brake Buster, diluted 5:1 with water into an IK Foam PRO 2 spray foam bottle. I always prefer to add the product straight onto the dry surface as pre rinsing dilutes the product further on impact. The wheel cleaner is a high pH mix so works great on tyres too, whilst it's left to dwell, just a couple of minutes (out of direct sunlight) the tyres are cleaner with the Tyre Scrubbing Brush which as you can see lifts out the deepest grime from the rubber.
The Big Softie brush gently agitates the wheel cleaner into the corners of the RS Spyder spokes and lugs, followed by the Woolly Wheel Wand for the barrel. The Fluffmeister Mini wash mitt gets the dirt of the face of the spokes and wheel before finally using our Foam 125R Swab for the Lug Nuts and brake calipers.
A good rinse and it's time to remove as much water as possible from the wheel and tyres using forced air from the Vertool Airdry 180, then a final towel dry with our Triple Twist Dual Mini 20cm x 40cm drying towel.
Finally we use Poorboys Bold N Bright Gel on our Tyre Stamp Brush to dress up the Pirelli side walls. The brush has extremely soft bristles and is perfect to dress the bead of the tyre without contaminating the wheel rim, it also locks away to keep your fingers clean during and after use.